L’AL105NX è lo standard del settore per la segnalazione acustica e visiva combinata. L’allarme a un’uscita di 113dB (A) è combinato con un faro stroboscopico allo Xenon. Conforme alle norme CPR, testato secondo le normative EN54-3 e EN54-23 e approvato da UL/cUL per l’uso in modalità privata. Con 64 frequenze di allarme e 4 stadi/ canali attivati da remoto.
| categorie | |
|---|---|
| Soluzioni |
| Alarm Horn: | |
|---|---|
| Maximum output: | 113dB(A) @ 1 m ±3dB [104dB(A) @ 10ft/3m ±3dB] |
| Nominal output: | 106dB(A) @ 1m ±3dB [97dB(A) @ 10ft/3m ±3dB] |
| No. of tones: | 64 (UKOOA / PFEER compliant) |
| No. of stages: | 4 |
| Volume control: | -12dB(A) tone dependent |
| Effective range: | 58m/190ft @ 1KHz |
| In rush: | 636mA within 4.0ms @ 24Vdc |
| Stage switching: | Negative (common positive) |
| Xenon Strobe: | |
| Energy: | 5 Joules(5Ws) |
| Flash rate: | 1Hz (60 fpm) DC units: 1.5Hz (90 fpm) & Double strike |
| Peak Candela: | 500,000 cd – calculated from energy (J) |
| Effective cd: | 250 cd – calculated from energy (J) |
| Peak Candela: | 86,935 cd* – measured ref. to I.E.S. |
| Effective cd: | 200 cd* – measured ref. to I.E.S. |
| Tube life: | Emissions may reduce to 70% after 8 million flashes |
| General: | |
| Safety Integrity Level: | SIL1 and SIL2 Route 2H IEC61508 (2010) |
| Ingress protection: | IP66 Type 4/4X/13/3R |
| Enclosure: | High impact UL94 V0 & 5VA FR ABS/PC |
| Lens colour filter: | Field replaceable UV stable PC |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) |
| Line monitoring: | Diode polarized for use in supervised circuits |
| Operating: | -40 to +66°C [-40° to +151°F] |
| Storage: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 95% at 20°C [68°F] |
| Vibration test: | 35Hz for a duration 4Hr (UL464/UL1638) |
| Jarring test: | 3ft/lb Energy (UL464/UL1638) |
| Impact test: | 3x 5lb (UL464/UL1638) |
| MTBF DC: | 114.79 years / 1,005,530 hours – MIL 217 |
| MTBF AC: | 86.29 years / 755,857 hours – MIL 217 |
| Weight DC: | 0.95kg / 2.10Ibs |
| Weight AC: | 1.20kg / 2.64Ibs |
